Please wait while the page loads...

2012 Toyota Corolla Check Engine Light Codes

The check engine light turning on can be quite intimidating to see that little light on your vehicle’s dashboard swiftly flashes, but in reality, it is not something that should cause you to shut down in fear right away. If you hear the term, diagnostic trouble codes (DTC), these are just another name for check engine light codes. These are automotive computer codes stored by the ECM, also known as the OBD (on-board computer diagnostic system) in your Corolla. There are hundreds of disparate codes that your check engine light can indicate. While that sounds daunting, with a little patience, tackling decisive diagnostics will give you appropriate knowledge about your vehicle and will also allow that Check Engine Light to do what it is really supposed to do: be your guide. Unfortunately, overt and appropriate vehicle symptoms do not always accompany an illuminated Check Engine Light. Since there are hundreds of likely OBD codes, there are also hundreds of likely reasons for the light, including:

  • Old Battery
  • Ignition system faults
  • Transmission issues
  • O2 Sensor
  • Computer output circuit issues
  • Bad Spark Plugs
  • Loose Gas Cap or Missing Gas Cap
  • Fuel and air metering systems problems
  • Emissions controls issues

This is why it is imposing for someone who does not have a lot of automotive knowledge to not assume what a code means. When your check engine light comes on, you should get it checked out quickly by a certified Toyota technician. If the engine light comes on due to a severe concern, you risk damaging your car added by not repairing the issue right away. Call Nalley Toyota Stonecrest at 7706290279 at this moment or schedule your check engine light service online today!

2012 Toyota Corolla Check Engine Light

If the check engine light in your 2012 Toyota Corolla starts flashing, that means that the problem needs hasty attention and your Toyota should be brought in rapidly. A flashing light indicates that the problem is adequate and if not taken care of rapidly may result in main damage to the automobile. This shining light usually indicates a harsh engine misfire allowing unburned fuel to be jettisoned into the exhaust system. There it can quickly boost the temperature of the catalytic converter to a point where damage is feasible, requiring an expensive repair. Some owners ask if spark plugs cause the check engine light to flash? This can explicitly be the cause. A bad, old or dirty spark plug can cause the engine to misfire. If your check engine light is twinkling, please contact our department of automotive experts at Nalley Toyota Stonecrest shortly by calling 7706290279. If the problem is ignored or you continue to drive, this can spread to the spark plug wires, catalytic converter, or ignition coils which can lead to a very lavish repair.

How many miles can you drive with the check engine light?

Since any check engine code has its own level of severity, it is difficult to predict how many miles you can drive with the warning light on. If you check engine light is flashing, we advocate that you pull over and contact Nalley Toyota Stonecrest to help elect for if your vehicle is safe to drive in or if we advocate a tow truck. It could be anything from a detrimental sensor to plug wires needing to be replenished. The safest bet is to decipher the code and then plan your strategy accordingly.

2012 Toyota Corolla Check Engine Light Flashing

Although there are frequent probable causes of an illuminated Check Engine Light, we know from years of providing Check Engine Light Diagnosis Service that there are several natural causes encompassing something as simple as a loose gas cap. Extra natural reasons for a Check Engine Light are a malfunction with the fuel injection system, faulty head gasket, faulty emissions control part, dirty mass airflow sensor, damaged oxygen sensor, or defective spark plugs to name a few. No matter what is the root cause of the Check Engine Light, we have the Toyota Certified Technicians and the certified service protocol to isolate the root problem and repair it as decisive to restore factory specifications. When this happens, the Check Engine Light turns off, and you can leave the service center knowing that your Toyota issue was fixed.

Every 2012 Toyota Corolla was designed with a high-technology performance monitoring system with a computer, and a series of sensors positioned strategically throughout the vehicle on its troublesome systems. The sensors are generally detecting conditions while sending data to the electronic control unit. If the electronic control unit detects that the data is out of factory specifications, the Check Engine Light illuminates telling you that there is a problem. However, that is the limitation of the Check Engine Light – it won’t tell you what definitely is unsound nor what to do about it. That’s where we come in; Nalley Toyota Stonecrest provides a Check Engine Light Diagnosis Service that isolates the core problem and gives you a recommendation on what to do next from a Extremely Qualified Service experienced.

How much does it cost to get the engine light checked?

The check engine light warns of issues ranging from a gas cap that's not properly tightened to a more unhealthy failure like a bad catalytic converter or a problem with one of the car's oxygen sensors, so it suitable to get the suitable code reading and diagnosis. The middle estimate for a check engine light diagnosis & testing is generally between $88 and $111. The suitable news, Nalley Toyota Stonecrest offers complimentary multi-point inspections and free diagnostics, in most cases, to help find out the cause of your check engine light.

What Does the Check Engine Light Mean?

One of the most commonly misunderstood lights or indicators in your 2012 Toyota Corolla is the check engine light. The check engine light is part of the onboard diagnostics system, and displays in a few accessible ways. It can say "Check Engine", it can be a symbol of an engine, it can even be a combination of both. This light lights up in either an amber or red color and is part of the diagnostics system found on your vehicle. Onboard computers increasingly have controlled and monitored vehicle performance since the 80s and do a mixture of things for your 2012 Toyota Corolla. Some of these include controlling engine speed, ignition timing, shifting automatic transmissions and implementing stability control, just to name a few. With that being said, the check engine light can imply a mixture of different things. It can be as easy as your gas cap being loose or as strict as engine knocking. If your check engine light is on in your 2012 Toyota Corolla, contact Nalley Toyota Stonecrest. Our Toyota service department can help you find out what code is turning your check engine light on or diagnose why your check engine light is shining. Contact Nalley Toyota Stonecrest today!

Will the check engine light reset itself?

The check engine light on your 2012 Toyota Corolla will frequently shut itself off if the issue or code that caused it to turn on is fixed. For example, if the cause of your check engine light coming on was a loose gas cap, if it's tightened, the light will turn itself off. Likewise, if your catalytic converter is going functional, and you did a lot of stop-and-go driving, that may have turned on the check engine light due to the high usage of the converter. In most cases, your 2012 Toyota Corolla light will go off after about 20-40 miles. If you drive over that amount and the light is still on, you will need to transport it in to Nalley Toyota Stonecrest so the light and code can be double-checked and reset.

Is it safe to drive your 2012 Toyota Corolla with the check engine light on?

This question is not remarkably uncomplicated because it all depends on the severity of the issue. If the cause is a minor issue, such as a loose gas cap, it should be dependable to drive. This is typically indicated by a steady glow of the check engine light. If you notice a difference in the performance of the car, it could be an indication of a more strict problem. If the check engine light is flashing, this means that there is a strict issue and it is recommended to service your Toyota Corolla shortly. Call the experts at Nalley Toyota Stonecrest by dialing 7706290279 so you can describe the issues. Or reduce your speed and deliver your 2012 Toyota to our certified mechanics as soon as conceivable.

Check Engine Light Service 2012 Toyota Corolla

What do you do when you’re driving along in your Toyota Corolla and suddenly, a yellow light illuminates on your dash and says "Check Engine". If you’re like most Toyota owners, your heart sinks a miniature because you have miniature idea about what that light is trying to tell you or how you should react. The fear of the unknown (or the cost of the unknown) can be just as stressful. But take a deep breath and realize the light coming on doesn’t mean you have to pull the vehicle over to the side of the road and call a tow truck, but it is recommended that you get your 2012 Toyota Corolla checked as soon as attainable. Ignoring that warning could end up causing exciting damage to expensive engine components.

When your 2012 Toyota Corolla's ECM (electronic control module), which is the vehicle's onboard computer, finds a problem in the electronic control system that it can’t suitable, a computer turns on your check engine light. This amber or yellow light is commonly labeled ā€œcheck engineā€ or ā€œservice engine soonā€, or the light may be nothing more than a picture of an engine, or a picture of the engine with the word ā€œcheck.ā€

When the light turns on, the ECM stores an engine code or ā€œtrouble codeā€ in its memory that identifies as the issue, whether it's a sensor or a failing engine part. This code is read with an electronic scan tool that is used by our Toyota auto repair mechanics at Nalley Toyota Stonecrest. There are also a number of comparably inexpensive code readers that are designed for do-it-yourselfers, should you choose that route too. While this code will tell you the issue that is detected, a true diagnosis still requires an trained skilled to imply the issue and repair it.

What could cause the check engine light to come on in a 2012 Toyota Corolla?

When your check engine light comes on, this could be as pure as tightening or replacing your gas cap. Likewise, the check engine light could also be a warning of a rigorous problem that could cause rigorous wear and tear to your engine and come with a substantial repair bill. Depending on your make and model, the check engine light will illuminate or blink. A steady glow generally means something less rigorous but a flashing check engine light indicates that your vehicle’s engine is in rigorous trouble and service is mandatory quickly. If your check engine light is flashing in your 2012 Toyota Corolla, we immensely recommend not to drive the vehicle and schedule Toyota service straightaway. Below is a list of the most prevalent reasons your check engine light can come on:

  • One of the most commonplace and frequent cause is that your 2012 Toyota Corolla gas cap is loose, damaged or missing. The gas cap for your 2012 Toyota Corolla serves multiple purposes. It prevents gas fumes from being released when you aren't driving, it seals the fuel system and helps maintain pressure within the fuel tank. What happens if you have a harmful fuel cap? If your gas cap is erstwhile or has a ruptured seal, you can lose fuel through evaporation which will result in more trips to the pump. Luckily, to replace a gas cap isn't costly. If your check engine light turns on hastily after you put gas in your 2012 Toyota Corolla, first thing you should check is to make courageous the cap isn’t loose — or that it's still on your car’s roof or at the fuel pump.
  • Issues with each aftermarket items. An aftermarket alarm, exhaust or diverse item can wreak havoc on your 2012 Toyota Corolla if it’s not installed perfectly. These aftermarket parts and accessories can eject the battery, trigger the check engine light, or even prohibit the vehicle from starting. If these issues sound commonplace, deliver your Corolla to Toyota and have our team of certified mechanics ensure that your aftermarket items were installed properly and aren't causing each issue. Getting accessories, especially aftermarket parts and accessories, or using OEM parts first place might cost a scant bit more but could save you money from having to get poor work and damage caused by poor installation work corrected.
  • Your O2 Sensor (Oxygen Sensor) needs to be replaced. The Oxygen sensor, known as the O2 sensor, measures the amount of oxygen in your exhaust system. If there is excess oxygen in your exhaust system, fuel burns faster and your vehicle will be fewer feasible when it comes to fuel economy. So what happens if I don’t replace your O2 sensor? A faulty sensor can not only affect your miles per gallon, but it can cause damage to your catalytic converter and your 2012 Toyota Corolla's spark plugs. The O2 sensor sends data to the vehicle’s onboard computer to choose the right mixture of air and fuel that enters the cylinders in your engine. A harmful O2 sensor can also cause a car to fail an emissions test.
  • The battery is low or dead. The battery in your 2012 Toyota Corolla is every dramatic. Without a car battery, your car won’t start, light up the road ahead, play the radio or charge your phone. Today’s car batteries last much longer than they did assorted decades ago, and they don't genuinely require maintenance. The price of a new one depends on the type of Toyota you drive, but check our current service coupons and specials.
  • Your catalytic converter is harmful or going harmful. The catalytic converter is a part of your 2012 Toyota Corolla’s exhaust system. The catalytic converter's function is to turn the carbon monoxide created by the combustion process into carbon dioxide. A damaged catalytic converter is usually caused by neglected maintenance, which is why Nalley Toyota Stonecrest offers a complimentary multi-point inspection with every Toyota service. If you have an issue with your catalytic converter and don't get it repaired, your 2012 Toyota Corolla will not pass an emissions test, show a lack of engine performance and will negatively affect your fuel economy. Your car may run at a higher temperature, too, which can cause diverse problems from overheating.
  • New Spark Plugs or Plug Wires are decisive for your 2012 Toyota Corolla. The spark plugs are the part of your engine that ignites the air/fuel mixture in the combustion chamber of your vehicle. This explosion is what moves the pistons and makes the engine run. The spark plug wires deliver the spark from the ignition coil to the spark plugs. If your spark plugs or spark plug wires are harmful or erstwhile, you will experience poor performance and reduced power. In some extreme cases, your engine will have trouble starting or continuing to run. Worn spark plugs and plug wires can cause clogged catalytic converter or damage to ignition coils and O2 sensors, finest to more costly repairs.
  • Your mass airflow sensor (known as MAF) needs to be replaced. The mass airflow sensor in your Toyota Corolla is what determines how much fuel is decisive to run your engine efficiently by measuring the amount of air entering the engine. As a part of the engine management system, the mass airflow sensor helps adjust to specific changes, like altitude. If your Toyota Corolla is having trouble starting, idling rough or has a rapid change in the position of the throttle pedal, this could be a sign of a harmful mass airflow sensor.
  • Your 2012 Toyota Corolla has a vacuum leak. Every Toyota Corolla has a vacuum system that performs a astonishing variety of functions. The vacuum system also helps lower harmful emissions by routing the fumes as gasoline evaporates through the engine. If you notice that your RPM is high in idle or randomly surges, a vacuum leak could be the cause. Over time, vacuum hoses can parched out and crack, especially if they’re exposed to exceptional heat or extreme frigid.