2013 Toyota Camry Check Engine Light

2013 Toyota Camry Check Engine Light

If the check engine light in your 2013 Toyota Camry starts flashing, that means that the problem needs immediate attention and your Toyota should be brought in expeditiously. A flashing light indicates that the problem is hazardous and if not taken care of expeditiously may result in gigantic damage to the vehicle. This blinking light ordinarily indicates a exacting engine misfire allowing unburned fuel to be ditched into the exhaust system. There it can rapidly raise the temperature of the catalytic converter to a point where damage is possible, requiring an fancy repair. Some owners ask if spark plugs cause the check engine light to flash? This can precisely be the cause. A destructive, classical or dirty spark plug can cause the engine to misfire. If the problem is ignored or you continue to drive, this can spread to the spark plug wires, catalytic converter, or ignition coils which can lead to a chiefly expensive repair. If your check engine light is flashing, please contact our team of automotive veterans at Nalley Toyota Stonecrest expeditiously by calling 7706290279.

Check Engine Light Service 2013 Toyota Camry

What do you do when you’re driving along in your Toyota Camry and suddenly, a yellow light illuminates on your dash and says "Check Engine". If you’re like most Toyota owners, your heart sinks a tiny because you have tiny idea about what that light is trying to tell you or how you should react. The fear of the unknown (or the cost of the unknown) can be just as stressful. But take a deep breath and realize the light coming on doesn’t mean you have to pull the car over to the side of the road and call a tow truck, but it is recommended that you get your 2013 Toyota Camry checked as soon as accessible. Ignoring that warning could end up causing powerful wear and tear to fancy engine elements.

When your 2013 Toyota Camry's ECM (electronic control module), which is the vehicle's onboard computer, finds a problem in the electronic control system that it can’t cheap, a computer turns on your check engine light. This amber or yellow light is naturally labeled “check engine” or “service engine soon”, or the light may be nothing more than a picture of an engine, or a picture of the engine with the word “check.”

When the light turns on, the ECM stores an engine code or “trouble code” in its memory that identifies as the issue, whether it's a sensor or a failing engine part. This code is read with an computerized scan tool that is used by our Toyota auto repair mechanics at Nalley Toyota Stonecrest. There are also a number of relatively low-cost code readers that are designed for do-it-yourselfers, should you designate that route too. While this code will tell you the issue that is detected, a true diagnosis still requires an experienced skilled to determine the issue and repair it.

2013 Toyota Camry Check Engine Light Codes

The check engine light turning on can be quite intimidating to see that little light on your vehicle’s dashboard suddenly illuminates, but in reality, it is not something that should cause you to shut down in fear right away. If you hear the term, diagnostic trouble codes (DTC), these are just another name for check engine light codes. These are automotive computer codes stored by the ECM, also known as the OBD (on-board computer diagnostic system) in your Camry. There are hundreds of extensive codes that your check engine light can represent. While that sounds daunting, with a little patience, tackling fundamental diagnostics will give you equitable knowledge about your vehicle and will also allow that Check Engine Light to do what it is actually supposed to do: be your guide. Unfortunately, overt and equitable vehicle symptoms do not always accompany an illuminated Check Engine Light. Since there are hundreds of convenient OBD codes, there are also hundreds of convenient reasons for the light, including:

• Computer output circuit issues
• Old Battery
• O2 Sensor
• Emissions controls issues
• Loose Gas Cap or Missing Gas Cap
• Bad Spark Plugs
• Ignition system faults
• Transmission issues
• Fuel and air metering systems problems

This is why it is noteworthy for someone who does not have assorted of automotive knowledge to not assume what a code means. When your check engine light comes on, you should get it checked out abruptly by a certified Toyota mechanic. If the engine light comes on due to a effective concern, you risk damaging your car additional by not repairing the issue right away. Call Nalley Toyota Stonecrest at 7706290279 today or schedule your check engine light service online today!

What Does the Check Engine Light Mean?

One of the most typically misunderstood lights or indicators in your 2013 Toyota Camry is the check engine light. The check engine light is part of the onboard diagnostics system, and displays in a few distinctive ways. It can say "Check Engine", it can be a symbol of an engine, it can even be a combination of both. This light illuminates in either an amber or red color and is part of the diagnostics system found on your vehicle. Onboard computers increasingly have controlled and monitored vehicle performance since the 80s and do a variety of things for your 2013 Toyota Camry. Some of these include ignition timing, shifting automatic transmissions controlling engine speed, and implementing stability control, just to name a few. With that being said, the check engine light can select a assortment of definitive things. It can be as easy as your gas cap being loose or as hazardous as engine knocking. If your check engine light is on in your 2013 Toyota Camry, contact Nalley Toyota Stonecrest. Contact Nalley Toyota Stonecrest today! Our Toyota service department can aid you find out what code is turning your check engine light on or probe why your check engine light is flashing.

What could cause the check engine light to come on in a 2013 Toyota Camry?

When your check engine light comes on, this could be as discernable as tightening or replacing your gas cap. Likewise, the check engine light could also be a warning of a relentless problem that could cause relentless damage to your engine and come with a substantial repair bill. Depending on your make and model, the check engine light will illuminate or blink. A steady glow typically means something less relentless but a shining check engine light indicates that your vehicle’s engine is in relentless trouble and service is needed immediately. If your check engine light is shining in your 2013 Toyota Camry, we highly recommend not to drive the vehicle and schedule Toyota service today. Below is a list of the most routine reasons your check engine light can come on:

• Issues with any aftermarket items. An aftermarket alarm, exhaust or added item can wreak havoc on your 2013 Toyota Camry if it’s not installed properly. These aftermarket parts and accessories can deposit the battery, trigger the check engine light, or even prevent the vehicle from starting. If these issues sound amiable, bring your Camry to Toyota and have our team of certified mechanics ensure that your aftermarket items were installed correctly and aren't causing any issue. Getting accessories, especially aftermarket parts and accessories, or using OEM parts initial place might cost a scant bit more but could save you money from having to get poor work and damage caused by poor installation work corrected.
• Your catalytic converter is harmful or going harmful. The catalytic converter is a part of your 2013 Toyota Camry’s exhaust system. The catalytic converter's function is to turn the carbon monoxide created by the combustion process into carbon dioxide. A damaged catalytic converter is usually caused by neglected maintenance, which is why Nalley Toyota Stonecrest offers a complimentary multi-point inspection with every Toyota service. If you have an issue with your catalytic converter and don't get it revamped, your 2013 Toyota Camry will not pass an emissions test, show a lack of engine performance and will negatively affect your fuel economy. Your car may run at a higher temperature, too, which can cause added problems from overheating.
• Your mass airflow sensor (known as MAF) needs to be replaced. The mass airflow sensor in your Toyota Camry is what determines how much fuel is needed to run your engine efficiently by measuring the amount of air entering the engine. As a part of the engine management system, the mass airflow sensor helps adjust to convinced changes, like altitude. If your Toyota Camry is having trouble starting, idling rough or has a precipitous change in the position of the throttle pedal, this could be a sign of a harmful mass airflow sensor.
• One of the most accepted and countless cause is that your 2013 Toyota Camry gas cap is loose, damaged or missing. The gas cap for your 2013 Toyota Camry serves multiple purposes. It prevents gas fumes from being released when you aren't driving, it seals the fuel system and helps maintain pressure within the fuel tank. What happens if you have a harmful fuel cap? If your gas cap is former or has a ruptured seal, you can lose fuel through evaporation which will result in more trips to the pump. Luckily, to replace a gas cap isn't costly. If your check engine light turns on swiftly after you put gas in your 2013 Toyota Camry, initial thing you should check is to make convinced the cap isn’t loose — or that it's still on your car’s roof or at the fuel pump.
• Your 2013 Toyota Camry has a vacuum leak. Every Toyota Camry has a vacuum system that performs a wide assortment of functions. The vacuum system also helps lower harmful emissions by routing the fumes as gasoline evaporates through the engine. If you notice that your RPM is high in idle or randomly surges, a vacuum leak could be the cause. Over time, vacuum hoses can barren out and crack, especially if they’re exposed to notable heat or extreme chilly.
• New Spark Plugs or Plug Wires are needed for your 2013 Toyota Camry. The spark plugs are the part of your engine that ignites the air/fuel variety in the combustion chamber of your vehicle. This explosion is what moves the pistons and makes the engine run. The spark plug wires deliver the spark from the ignition coil to the spark plugs. If your spark plugs or spark plug wires are harmful or former, you will experience poor performance and reduced power. In some extreme cases, your engine will have trouble starting or continuing to run. Worn spark plugs and plug wires can cause clogged catalytic converter or damage to ignition coils and O2 sensors, first-rate to more costly repairs.
• The battery is low or dead. The battery in your 2013 Toyota Camry is every rigorous. Without a car battery, your car won’t start, light up the road ahead, play the radio or charge your phone. Today’s car batteries last much longer than they did a few decades ago, and they don't surely require maintenance. The rate of a new one depends on the type of Toyota you drive, but check our prevailing service coupons and specials.
• Your O2 Sensor (Oxygen Sensor) needs to be replaced. The Oxygen sensor, admitted as the O2 sensor, measures the amount of oxygen in your exhaust system. If there is excess oxygen in your exhaust system, fuel burns faster and your vehicle will be less persuasive when it comes to fuel economy. So what happens if I don’t replace your O2 sensor? A faulty sensor can not only affect your miles per gallon, but it can cause damage to your catalytic converter and your 2013 Toyota Camry's spark plugs. The O2 sensor sends data to the vehicle’s onboard computer to imply the right variety of air and fuel that enters the cylinders in your engine. A harmful O2 sensor can also cause a car to fail an emissions test.

How many miles can you drive with the check engine light?

Since all check engine code has its own level of severity, it is not easy to predict how several miles you can commute with the warning light on. The safest bet is to decipher the code and then plan your strategy accordingly. If you check engine light is flashing, we recommend that you pull over and contact Nalley Toyota Stonecrest to help learn if your vehicle is safe to commute in or if we recommend a tow truck. It could be anything from a bad sensor to plug wires needing to be replaced.

Will the check engine light reset itself?

The check engine light on your 2013 Toyota Camry will usually shut itself off if the issue or code that caused it to turn on is fixed. For example, if the cause of your check engine light coming on was a loose gas cap, if it's tightened, the light will turn itself off. Likewise, if your catalytic converter is going proper, and you did a few of stop-and-go driving, that may have turned on the check engine light due to the high usage of the converter. In most cases, your 2013 Toyota Camry light will go off after about 20-40 miles. If you drive over that amount and the light is still on, you will need to transport it in to Nalley Toyota Stonecrest so the light and code can be double-checked and reset.

2013 Toyota Camry Check Engine Light Flashing

Although there are countless likely causes of an illuminated Check Engine Light, we know from years of providing Check Engine Light Diagnosis Service that there are frequent prevalent causes including something as straightforward as a loose gas cap. Additional prevalent reasons for a Check Engine Light are damaged oxygen sensor, a malfunction with the fuel injection system, dirty mass airflow sensor, faulty emissions control part, faulty head gasket, or defective spark plugs to name a few. No matter what is the root cause of the Check Engine Light, we have the Toyota Certified Technicians and the certified service protocol to isolate the root problem and repair it as imperative to restore factory specifications. When this happens, the Check Engine Light turns off, and you can leave the service center knowing that your Toyota issue was revamped.

Every 2013 Toyota Camry was designed with a high-technology performance monitoring system with a computer, and a series of sensors positioned strategically throughout the car on its hard systems. The sensors are commonly detecting conditions while sending data to the electronic control unit. If the electronic control unit detects that the data is out of factory specifications, the Check Engine Light illuminates telling you that there is a problem. However, that is the limitation of the Check Engine Light – it won’t tell you what explicitly is culpable nor what to do about it. That’s where we come in; Nalley Toyota Stonecrest provides a Check Engine Light Diagnosis Service that isolates the core problem and gives you a recommendation on what to do next from a Notably Qualified Service professional.

How much does it cost to get the engine light checked?

The average cost for a check engine light diagnosis & testing is consistently between $88 and $111. The momentous news, Nalley Toyota Stonecrest offers complimentary multi-point inspections and free diagnostics, in most cases, to assist learn the cause of your check engine light. The check engine light warns of issues ranging from a gas cap that's not properly tightened to a more hazardous failure like a harmful catalytic converter or a problem with one of the car's oxygen sensors, so it momentous to get the convenient code reading and diagnosis.

Is it safe to drive your 2013 Toyota Camry with the check engine light on?

This question is not very easy because it all depends on the severity of the issue. If the cause is a minor issue, such as a loose gas cap, it should be safe to drive. This is normally indicated by a possible glow of the check engine light. If you notice a difference in the performance of the vehicle, it could be an indication of a more draconian problem. If the check engine light is blinking, this means that there is a draconian issue and it is recommended to service your Toyota Camry promptly. Call the experts at Nalley Toyota Stonecrest by dialing 7706290279 so you can describe the issues. Or reduce your speed and bring your 2013 Toyota to our certified mechanics as soon as alive.