Please wait while the page loads...

How much does it cost to get the engine light checked?

The check engine light warns of issues ranging from a gas cap that's not appropriately tightened to a more miraculous failure like a bad catalytic converter or a problem with one of the car's oxygen sensors, so it immense to get the factual code reading and diagnosis. The average cost for a check engine light diagnosis & testing is commonly between $88 and $111. The immense news, Nalley Toyota Stonecrest offers complimentary multi-point inspections and free diagnostics, in most cases, to help opt for the cause of your check engine light.

Check Engine Light Service 2015 Toyota Tacoma

What do you do when you’re driving along in your Toyota Tacoma and suddenly, a yellow light illuminates on your dash and says "Check Engine". If you’re like most Toyota owners, your heart sinks a small because you have small idea about what that light is trying to tell you or how you should react. The fear of the unknown (or the cost of the unknown) can be just as stressful. But take a deep breath and realize the light coming on doesn’t mean you have to pull the car over to the side of the road and call a tow truck, but it is recommended that you get your 2015 Toyota Tacoma checked as soon as conceivable. Ignoring that warning could end up causing sizable damage to expensive engine components.

When your 2015 Toyota Tacoma's ECM (electronic control module), which is the vehicle's onboard computer, finds a problem in the electronic control system that it can’t marvelous, a computer turns on your check engine light. This amber or yellow light is normally labeled “check engine” or “service engine soon”, or the light may be nothing more than a picture of an engine, or a picture of the engine with the word “check.”

When the light turns on, the ECM stores an engine code or “trouble code” in its memory that identifies as the issue, whether it's a sensor or a failing engine part. This code is read with an electronic scan tool that is used by our Toyota auto repair mechanics at Nalley Toyota Stonecrest. There are also a number of comparably inexpensive code readers that are designed for do-it-yourselfers, should you choose that route too. While this code will tell you the issue that is detected, a true diagnosis still requires an effective professional to determine the issue and repair it.

2015 Toyota Tacoma Check Engine Light Flashing

Although there are countless feasible causes of an illuminated Check Engine Light, we know from years of providing Check Engine Light Diagnosis Service that there are innumerable prevalent causes including something as authentic as a loose gas cap. Alternative prevalent reasons for a Check Engine Light are damaged oxygen sensor, dirty mass airflow sensor, faulty emissions control part, faulty head gasket, a malfunction with the fuel injection system, or defective spark plugs to name a few. No matter what is the root cause of the Check Engine Light, we have the Toyota Certified Technicians and the certified service protocol to isolate the root problem and repair it as basic to restore factory specifications. When this happens, the Check Engine Light turns off, and you can leave the service center knowing that your Toyota issue was fixed.

Every 2015 Toyota Tacoma was designed with a high-technology performance monitoring system with a computer, and a series of sensors positioned strategically throughout the vehicle on its vital systems. The sensors are continually detecting conditions while sending data to the mechanical control unit. If the mechanical control unit detects that the data is out of factory specifications, the Check Engine Light illuminates telling you that there is a problem. However, that is the limitation of the Check Engine Light – it won’t tell you what exactly is mistaken nor what to do about it. That’s where we come in; Nalley Toyota Stonecrest provides a Check Engine Light Diagnosis Service that isolates the core problem and gives you a recommendation on what to do next from a Remarkably Qualified Service skilled.

What Does the Check Engine Light Mean?

One of the most commonly misunderstood lights or indicators in your 2015 Toyota Tacoma is the check engine light. The check engine light is part of the onboard diagnostics system, and displays in a few several ways. It can say "Check Engine", it can be a symbol of an engine, it can even be a combination of both. This light illuminates in either an amber or red color and is part of the diagnostics system found on your vehicle. Onboard computers increasingly have controlled and monitored vehicle performance since the 80s and do a variety of things for your 2015 Toyota Tacoma. Some of these include shifting automatic transmissions controlling engine speed, ignition timing, and implementing stability control, just to name a few. With that being said, the check engine light can mean a variety of different things. It can be as clear as your gas cap being loose or as critical as engine knocking. If your check engine light is on in your 2015 Toyota Tacoma, contact Nalley Toyota Stonecrest. Contact Nalley Toyota Stonecrest today! Our Toyota service department can help you find out what code is turning your check engine light on or observe why your check engine light is flashing.

2015 Toyota Tacoma Check Engine Light Codes

The check engine light turning on can be quite intimidating to see that scant light on your vehicle’s dashboard abruptly illuminates, but in reality, it is not something that should cause you to shut down in fear right away. If you hear the term, diagnostic trouble codes (DTC), these are just another name for check engine light codes. These are automotive computer codes stored by the ECM, also common as the OBD (on-board computer diagnostic system) in your Tacoma. There are hundreds of distinctive codes that your check engine light can imply. While that sounds daunting, with a scant patience, tackling vital diagnostics will give you helpful knowledge about your vehicle and will also allow that Check Engine Light to do what it is genuinely supposed to do: be your guide. Unfortunately, accessible and needed vehicle symptoms do not always accompany an illuminated Check Engine Light. Since there are hundreds of usable OBD codes, there are also hundreds of usable reasons for the light, including:

  • Loose Gas Cap or Missing Gas Cap
  • Old Battery
  • O2 Sensor
  • Bad Spark Plugs
  • Transmission issues
  • Computer output circuit issues
  • Fuel and air metering systems problems
  • Ignition system faults
  • Emissions controls issues

This is why it is big for someone who does not have a lot of automotive knowledge to not assume what a code means. When your check engine light comes on, you should get it checked out swiftly by a certified Toyota mechanic. Call Nalley Toyota Stonecrest at 7706290279 today or schedule your check engine light service online today! If the engine light comes on due to a momentous concern, you risk damaging your car supplemental by not repairing the issue right away.

2015 Toyota Tacoma Check Engine Light

If the check engine light in your 2015 Toyota Tacoma starts flashing, that means that the problem needs hasty attention and your Toyota should be brought in now. A flashing light indicates that the problem is alarming and if not taken care of now may result in dominant damage to the vehicle. This blinking light naturally indicates a rigorous engine misfire allowing unburned fuel to be discharged into the exhaust system. There it can rapidly increase the temperature of the catalytic converter to a point where damage is likely, requiring an expensive repair. Some owners ask if spark plugs cause the check engine light to flash? This can entirely be the cause. A bad, old or dirty spark plug can cause the engine to misfire. If the problem is ignored or you continue to drive, this can spread to the spark plug wires, catalytic converter, or ignition coils which can lead to a very expensive repair. If your check engine light is flashing, please contact our team of automotive consultants at Nalley Toyota Stonecrest hastily by calling 7706290279.

Is it safe to drive your 2015 Toyota Tacoma with the check engine light on?

This question is not highly uncomplicated because it all depends on the severity of the issue. If the cause is a minor issue, such as a loose gas cap, it should be protected to drive. This is typically indicated by a steady glow of the check engine light. If you notice a difference in the performance of the automobile, it could be an indication of a more excellent problem. If the check engine light is twinkling, this means that there is a excellent issue and it is recommended to service your Toyota Tacoma today. Call the experts at Nalley Toyota Stonecrest by dialing 7706290279 so you can describe the issues. Or reduce your speed and bring your 2015 Toyota to our certified mechanics as soon as potential.

What could cause the check engine light to come on in a 2015 Toyota Tacoma?

When your check engine light comes on, this could be as easy as tightening or replacing your gas cap. Likewise, the check engine light could also be a warning of a precarious problem that could cause precarious damage to your engine and come with a big repair bill. Depending on your make and model, the check engine light will illuminate or blink. A steady glow consistently means something less precarious but a flashing check engine light illustrates that your vehicle’s engine is in precarious trouble and service is needed suddenly. If your check engine light is flashing in your 2015 Toyota Tacoma, we highly recommend not to drive the vehicle and schedule Toyota service at this moment. Below is a list of the most prevailing reasons your check engine light can come on:

  • New Spark Plugs or Plug Wires are basic for your 2015 Toyota Tacoma. The spark plugs are the part of your engine that ignites the air/fuel assortment in the combustion chamber of your vehicle. This explosion is what moves the pistons and makes the engine run. The spark plug wires bring the spark from the ignition coil to the spark plugs. If your spark plugs or spark plug wires are harmful or old, you will experience scanty performance and reduced power. In some extreme cases, your engine will have trouble starting or continuing to run. Worn spark plugs and plug wires can cause clogged catalytic converter or damage to ignition coils and O2 sensors, big to more expensive repairs.
  • Your catalytic converter is harmful or going harmful. The catalytic converter is a part of your 2015 Toyota Tacoma’s exhaust system. The catalytic converter's work is to turn the carbon monoxide created by the combustion process into carbon dioxide. A damaged catalytic converter is generally caused by neglected maintenance, which is why Nalley Toyota Stonecrest offers a complimentary multi-point inspection with every Toyota service. If you have an issue with your catalytic converter and don't get it serviced, your 2015 Toyota Tacoma will not pass an emissions test, show a lack of engine performance and will negatively affect your fuel economy. Your car may run at a higher temperature, too, which can cause distinct problems from overheating.
  • The battery is scanty or dead. The battery in your 2015 Toyota Tacoma is every exciting. Without a car battery, your car won’t start, light up the road ahead, play the radio or charge your phone. Today’s car batteries last much longer than they did assorted decades ago, and they don't really require maintenance. The price of a new one depends on the type of Toyota you travel to work, but check our current service coupons and specials.
  • Your O2 Sensor (Oxygen Sensor) needs to be replaced. The Oxygen sensor, present as the O2 sensor, measures the amount of oxygen in your exhaust system. If there is excess oxygen in your exhaust system, fuel burns faster and your vehicle will be less excellent when it comes to fuel economy. So what happens if I don’t replace your O2 sensor? A faulty sensor can not only affect your miles per gallon, but it can cause damage to your catalytic converter and your 2015 Toyota Tacoma's spark plugs. The O2 sensor sends data to the vehicle’s onboard computer to designate the right assortment of air and fuel that enters the cylinders in your engine. A harmful O2 sensor can also cause a car to fail an emissions test.
  • Your 2015 Toyota Tacoma has a vacuum leak. Every Toyota Tacoma has a vacuum system that performs a important variety of functions. The vacuum system also helps lessen harmful emissions by routing the fumes as gasoline evaporates through the engine. If you notice that your RPM is high in idle or randomly surges, a vacuum leak could be the cause. Over time, vacuum hoses can bare out and crack, especially if they’re exposed to exciting heat or extreme bitter.
  • Your mass airflow sensor (known as MAF) needs to be replaced. The mass airflow sensor in your Toyota Tacoma is what determines how much fuel is basic to run your engine efficiently by measuring the amount of air entering the engine. As a part of the engine management system, the mass airflow sensor helps adjust to conclusive changes, like altitude. If your Toyota Tacoma is having trouble starting, idling rough or has a quick change in the position of the throttle pedal, this could be a sign of a harmful mass airflow sensor.
  • Issues with any aftermarket items. An aftermarket alarm, exhaust or distinct item can wreak havoc on your 2015 Toyota Tacoma if it’s not installed accordingly. These aftermarket parts and accessories can drain the battery, trigger the check engine light, or even stop the vehicle from starting. If these issues sound appreciative, bring your Tacoma to Toyota and have our company of certified technicians ensure that your aftermarket items were installed correctly and aren't causing any issue. Getting accessories, especially aftermarket parts and accessories, or using OEM parts first place might cost a scant bit more but could save you money from having to get scanty work and damage caused by scanty installation work corrected.
  • One of the most decent and frequent cause is that your 2015 Toyota Tacoma gas cap is loose, damaged or missing. The gas cap for your 2015 Toyota Tacoma serves multiple purposes. It prevents gas fumes from being released when you aren't driving, it seals the fuel system and helps maintain pressure within the fuel tank. What happens if you have a harmful fuel cap? If your gas cap is old or has a ruptured seal, you can lose fuel through evaporation which will result in more trips to the pump. Luckily, to replace a gas cap isn't expensive. If your check engine light turns on expeditiously after you put gas in your 2015 Toyota Tacoma, first thing you should check is to make positive the cap isn’t loose — or that it's still on your car’s roof or at the fuel pump.

How many miles can you drive with the check engine light?

The safest bet is to decipher the code and then plan your strategy accordingly. It could be anything from a bad sensor to plug wires needing to be replaced. If you check engine light is flashing, we advocate that you pull over and contact Nalley Toyota Stonecrest to help embrace if your vehicle is safe to drive in or if we advocate a tow truck. Since all check engine code has its own level of severity, it is laborious to predict how frequent miles you can drive with the warning light on.

Will the check engine light reset itself?

The check engine light on your 2015 Toyota Tacoma will usually shut itself off if the issue or code that caused it to turn on is repaired. For example, if the cause of your check engine light coming on was a loose gas cap, if it's tightened, the light will turn itself off. Likewise, if your catalytic converter is going apt, and you did a lot of stop-and-go driving, that may have turned on the check engine light due to the high usage of the converter. In most cases, your 2015 Toyota Tacoma light will go off after about 20-40 miles. If you commute over that dump and the light is still on, you will need to bring it in to Nalley Toyota Stonecrest so the light and code can be double-checked and reset.