Please wait while the page loads...

Check Engine Light Service 2016 Toyota Tacoma

What do you do when you’re driving along in your Toyota Tacoma and abruptly, a yellow light illuminates on your dash and says "Check Engine". If you’re like most Toyota owners, your heart sinks a scant because you have scant idea about what that light is trying to tell you or how you should react. The fear of the unknown (or the rate of the unknown) can be just as stressful. But take a deep breath and realize the light coming on doesn’t illustrate you have to pull the car over to the side of the road and call a tow truck, but it is recommended that you get your 2016 Toyota Tacoma checked as soon as potential. Ignoring that warning could end up causing major damage to expensive engine components.

When your 2016 Toyota Tacoma's ECM (electronic control module), which is the vehicle's onboard computer, finds a problem in the electronic control system that it can’t honorable, a computer turns on your check engine light. This amber or yellow light is normally labeled “check engine” or “service engine soon”, or the light may be nothing more than a picture of an engine, or a picture of the engine with the word “check.”

When the light turns on, the ECM stores an engine code or “trouble code” in its memory that identifies as the issue, whether it's a sensor or a failing engine part. This code is read with an electrical scan tool that is used by our Toyota auto repair mechanics at Nalley Toyota Stonecrest. There are also a number of rather honest code readers that are designed for do-it-yourselfers, should you determine that route too. While this code will tell you the issue that is detected, a true diagnosis still requires an experienced mechanical to imply the issue and repair it.

2016 Toyota Tacoma Check Engine Light

A glaring light indicates that the problem is perilous and if not taken care of immediately may result in major break to the vehicle. If the check engine light in your 2016 Toyota Tacoma starts glaring, that means that the problem needs urgent attention and your Toyota should be brought in immediately. This twinkling light frequently indicates a strict engine misfire allowing unused fuel to be discharged into the exhaust system. There it can swiftly expand the temperature of the catalytic converter to a point where damage is achievable, requiring an expensive repair. Some owners ask if spark plugs cause the check engine light to flash? This can entirely be the cause. A bad, old or dirty spark plug can cause the engine to misfire. If your check engine light is flashing, please contact our squad of automotive consultants at Nalley Toyota Stonecrest rapidly by calling 7706290279. If the problem is ignored or you continue to drive, this can spread to the spark plug wires, catalytic converter, or ignition coils which can lead to a very expensive repair.

How many miles can you drive with the check engine light?

It could be anything from a bad sensor to plug wires needing to be replaced. If you check engine light is flashing, we advocate that you pull over and contact Nalley Toyota Stonecrest to help read if your vehicle is dependable to drive in or if we advocate a tow truck. Since each check engine code has its own level of severity, it is difficult to predict how plentiful miles you can drive with the warning light on. The safest bet is to decipher the code and then plan your strategy accordingly.

What Does the Check Engine Light Mean?

One of the most generally misunderstood lights or indicators in your 2016 Toyota Tacoma is the check engine light. The check engine light is part of the onboard diagnostics system, and displays in a few distinctive ways. It can say "Check Engine", it can be a symbol of an engine, it can even be a combination of both. This light illuminates in either an amber or red color and is part of the diagnostics system found on your automobile. Onboard computers increasingly have controlled and monitored automobile performance since the 80s and do a variety of things for your 2016 Toyota Tacoma. Some of these include ignition timing, shifting automatic transmissions controlling engine speed, and implementing stability control, just to name a few. With that being said, the check engine light can mean a assortment of further things. It can be as easy as your gas cap being loose or as risky as engine knocking. If your check engine light is on in your 2016 Toyota Tacoma, contact Nalley Toyota Stonecrest. Our Toyota service department can help you find out what code is turning your check engine light on or observe why your check engine light is shining. Contact Nalley Toyota Stonecrest today!

What could cause the check engine light to come on in a 2016 Toyota Tacoma?

When your check engine light comes on, this could be as straightforward as tightening or replacing your gas cap. Likewise, the check engine light could also be a warning of a unstable problem that could cause unstable damage to your engine and come with a considerable repair bill. Depending on your make and model, the check engine light will illuminate or blink. A steady glow commonly means something less unstable but a flashing check engine light indicates that your vehicle’s engine is in unstable trouble and service is imperative expeditiously. If your check engine light is flashing in your 2016 Toyota Tacoma, we remarkably recommend not to drive the vehicle and schedule Toyota service today. Below is a list of the most common reasons your check engine light can come on:

  • New Spark Plugs or Plug Wires are needed for your 2016 Toyota Tacoma. The spark plugs are the part of your engine that ignites the air/fuel mixture in the combustion chamber of your vehicle. This explosion is what moves the pistons and makes the engine run. The spark plug wires deliver the spark from the ignition coil to the spark plugs. If your spark plugs or spark plug wires are bad or common, you will experience poor performance and reduced power. In some extreme cases, your engine will have trouble starting or continuing to run. Worn spark plugs and plug wires can cause clogged catalytic converter or damage to ignition coils and O2 sensors, dominant to more expensive repairs.
  • Your mass airflow sensor (known as MAF) needs to be replaced. The mass airflow sensor in your Toyota Tacoma is what determines how much fuel is needed to run your engine efficiently by measuring the amount of air entering the engine. As a part of the engine management system, the mass airflow sensor helps adjust to actual changes, like altitude. If your Toyota Tacoma is having trouble starting, idling rough or has a sudden change in the position of the throttle pedal, this could be a sign of a bad mass airflow sensor.
  • Your catalytic converter is bad or going bad. The catalytic converter is a part of your 2016 Toyota Tacoma’s exhaust system. The catalytic converter's function is to turn the carbon monoxide created by the combustion process into carbon dioxide. A damaged catalytic converter is often caused by neglected maintenance, which is why Nalley Toyota Stonecrest offers a complimentary multi-point inspection with every Toyota service. If you have an issue with your catalytic converter and don't get it revamped, your 2016 Toyota Tacoma will not pass an emissions test, show a lack of engine performance and will negatively affect your fuel economy. Your car may run at a higher temperature, too, which can cause alternative problems from overheating.
  • One of the most current and countless cause is that your 2016 Toyota Tacoma gas cap is loose, damaged or missing. The gas cap for your 2016 Toyota Tacoma serves multiple purposes. It prevents gas fumes from being released when you aren't driving, it seals the fuel system and helps maintain pressure within the fuel tank. What happens if you have a bad fuel cap? If your gas cap is common or has a ruptured seal, you can lose fuel through evaporation which will result in more trips to the pump. Luckily, to replace a gas cap isn't expensive. If your check engine light turns on instantly after you put gas in your 2016 Toyota Tacoma, first thing you should check is to make satisfied the cap isn’t loose — or that it's still on your car’s roof or at the fuel pump.
  • Your O2 Sensor (Oxygen Sensor) needs to be replaced. The Oxygen sensor, acknowledged as the O2 sensor, measures the amount of oxygen in your exhaust system. If there is excess oxygen in your exhaust system, fuel burns faster and your vehicle will be less compelling when it comes to fuel economy. So what happens if I don’t replace your O2 sensor? A faulty sensor can not only affect your miles per gallon, but it can cause damage to your catalytic converter and your 2016 Toyota Tacoma's spark plugs. The O2 sensor sends data to the vehicle’s onboard computer to imply the right mixture of air and fuel that enters the cylinders in your engine. A bad O2 sensor can also cause a car to fail an emissions test.
  • Issues with any aftermarket items. An aftermarket alarm, exhaust or alternative item can wreak havoc on your 2016 Toyota Tacoma if it’s not installed appropriately. These aftermarket parts and accessories can discharge the battery, trigger the check engine light, or even prevent the vehicle from starting. If these issues sound current, bring your Tacoma to Toyota and have our team of certified technicians ensure that your aftermarket items were installed accurately and aren't causing any issue. Getting accessories, tremendously aftermarket parts and accessories, or using OEM parts first place might cost a small bit more but could save you money from having to get poor work and damage caused by poor installation work corrected.
  • The battery is low or dead. The battery in your 2016 Toyota Tacoma is every fitting. Without a car battery, your car won’t start, light up the road ahead, play the radio or charge your phone. Today’s car batteries last much longer than they did assorted decades ago, and they don't really require maintenance. The rate of a new one depends on the type of Toyota you drive, but check our ongoing service coupons and specials.
  • Your 2016 Toyota Tacoma has a vacuum leak. Every Toyota Tacoma has a vacuum system that performs a wide mixture of functions. The vacuum system also helps cut down harmful emissions by routing the fumes as gasoline evaporates through the engine. If you notice that your RPM is high in idle or randomly surges, a vacuum leak could be the cause. Over time, vacuum hoses can dry out and crack, tremendously if they’re exposed to exciting heat or extreme chilled.

How much does it cost to get the engine light checked?

The check engine light warns of issues ranging from a gas cap that's not properly tightened to a more efficient failure like a bad catalytic converter or a problem with one of the car's oxygen sensors, so it essential to get the admitted code reading and diagnosis. The average cost for a check engine light diagnosis & testing is commonly between $88 and $111. The essential news, Nalley Toyota Stonecrest offers complimentary multi-point inspections and free diagnostics, in most cases, to help prefer the cause of your check engine light.

2016 Toyota Tacoma Check Engine Light Flashing

Although there are countless feasible causes of an illuminated Check Engine Light, we know from years of providing Check Engine Light Diagnosis Service that there are frequent normal causes incorporating something as pure as a loose gas cap. Other normal reasons for a Check Engine Light are faulty emissions control part, dirty mass airflow sensor, damaged oxygen sensor, faulty head gasket, a malfunction with the fuel injection system, or defective spark plugs to name a few. No matter what is the root cause of the Check Engine Light, we have the Toyota Certified Mechanics and the certified service protocol to isolate the root problem and repair it as basic to restore factory specifications. When this happens, the Check Engine Light turns off, and you can leave the service center knowing that your Toyota issue was fixed.

Every 2016 Toyota Tacoma was designed with a high-technology performance monitoring system with a computer, and a series of sensors positioned strategically throughout the vehicle on its essential systems. The sensors are continually detecting conditions while sending data to the mechanical control unit. If the mechanical control unit detects that the data is out of factory specifications, the Check Engine Light illuminates telling you that there is a problem. However, that is the limitation of the Check Engine Light – it won’t tell you what exactly is incorrect nor what to do about it. That’s where we come in; Nalley Toyota Stonecrest provides a Check Engine Light Diagnosis Service that isolates the core problem and gives you a recommendation on what to do next from a Highly Qualified Service professional.

2016 Toyota Tacoma Check Engine Light Codes

The check engine light turning on can be quite intimidating to see that miniature light on your vehicle’s dashboard quickly illuminates, but in reality, it is not something that should cause you to shut down in fear right away. If you hear the term, diagnostic trouble codes (DTC), these are just another name for check engine light codes. These are automotive computer codes stored by the ECM, also known as the OBD (on-board computer diagnostic system) in your Tacoma. There are hundreds of private codes that your check engine light can represent. While that sounds daunting, with a miniature patience, tackling decisive diagnostics will give you convenient knowledge about your vehicle and will also allow that Check Engine Light to do what it is really supposed to do: be your guide. Unfortunately, discernible and convenient vehicle symptoms do not always accompany an illuminated Check Engine Light. Since there are hundreds of cooperative OBD codes, there are also hundreds of cooperative reasons for the light, including:

  • Bad Spark Plugs
  • O2 Sensor
  • Emissions controls issues
  • Computer output circuit issues
  • Transmission issues
  • Old Battery
  • Ignition system faults
  • Fuel and air metering systems problems
  • Loose Gas Cap or Missing Gas Cap

This is why it is precarious for someone who does not have a lot of automotive knowledge to not assume what a code means. Call Nalley Toyota Stonecrest at 7706290279 at this moment or schedule your check engine light service online today! When your check engine light comes on, you should get it checked out quickly by a certified Toyota mechanic. If the engine light comes on due to a perilous concern, you risk damaging your car other by not repairing the issue right away.

Is it safe to drive your 2016 Toyota Tacoma with the check engine light on?

If the check engine light is flashing, this means that there is a unhealthy issue and it is recommended to service your Toyota Tacoma shortly. This question is not very commonplace because it all depends on the severity of the issue. If the cause is a minor issue, such as a loose gas cap, it should be reliable to drive. This is frequently indicated by a dependable glow of the check engine light. If you notice a difference in the performance of the vehicle, it could be an indication of a more critical problem. Call the experts at Nalley Toyota Stonecrest by dialing 7706290279 so you can describe the issues. Or reduce your speed and bring your 2016 Toyota to our certified mechanics as soon as conceivable.

Will the check engine light reset itself?

The check engine light on your 2016 Toyota Tacoma will usually shut itself off if the issue or code that caused it to turn on is repaired. For example, if the cause of your check engine light coming on was a loose gas cap, if it's tightened, the light will turn itself off. Likewise, if your catalytic converter is going persuasive, and you did a lot of stop-and-go driving, that may have turned on the check engine light due to the high usage of the converter. In most cases, your 2016 Toyota Tacoma light will go off after about 20-40 miles. If you drive over that amount and the light is still on, you will need to bring it in to Nalley Toyota Stonecrest so the light and code can be double-checked and reset.